Imagine Pools fiberglass pool
Authorized Imagine Pools Dealer

Fiberglass Pools,
Built for East Tennessee.

We are a proud dealer of Imagine Pools, the premium fiberglass pool manufacturer. Pick a proven model, choose your color, and we handle the rest, from dig to first swim in as little as 3 to 4 weeks.

Quick Answer

A fiberglass pool in Knoxville and East Tennessee runs $70,000 to $190,000+ installed and is usually swim-ready in 3 to 4 weeks, because the shell is built in a factory and crane-set in your yard in a single day.

  • Cost: $70,000 to $190,000+ installed, depending on size, gelcoat color, and add-ons like a tanning ledge, heater, automation, or spa.
  • Timeline: about 3 to 4 weeks from dig to first swim, the fastest pool type to install.
  • Low maintenance: the smooth gelcoat surface resists algae and uses fewer chemicals than a plaster pool.
  • We are an authorized Imagine Pools dealer and handle design, permits, and the full build with one point of contact.

How much does a fiberglass pool cost in Knoxville?

Most fiberglass pools run $70,000 to $190,000+ installed. Size, gelcoat color, and add-ons like a tanning ledge, heater, automation, or a spa move the number within that range.

How long does a fiberglass pool take to install?

About 3 to 4 weeks once the shell is set. The pool is manufactured in a controlled facility and crane-set in a single day, which is why it is the fastest pool type to install.

Why Fiberglass

The Smart Pool for Tennessee Backyards

Fiberglass is the fastest, lowest-maintenance way to own a quality pool. Here is what sets an Imagine Pools build apart.

Installed in 3 to 4 Weeks

The shell is manufactured in a controlled facility, then crane-set into your yard in a single day. From dig to swim in weeks, not months.

Easier, Cheaper Upkeep

The non-porous gelcoat surface resists algae, so you scrub less and spend less on chemicals over the life of the pool.

Built to Last

Imagine Pools shells are manufactured in a controlled facility to exacting standards, then professionally installed to last for decades.

Engineered, Not Improvised

Each model is a proven, pre-engineered design with built-in steps, benches, and ledges, the same quality shell every time.

The Pools

Pool Models

From compact plunge pools to 40-foot showpieces. Tap any pool for photos, sizes, and specs. Every model comes in any of the colors below.

The Elation fiberglass pool by Imagine Pools
The Elation pool shape drawing
8 ft DeepPool Shape

The Elation

40′

A 40-foot showpiece with an 8-foot deep end, a clear swim lane, and a wide wraparound bench.

View photos & specs
The Glimmer fiberglass pool by Imagine Pools
The Glimmer pool shape drawing
Infinity EdgePool Shape

The Glimmer

23′

A striking crescent shape with a luxurious infinity edge, built for gathering and socializing.

View photos & specs
The Inspiration fiberglass pool by Imagine Pools
The Inspiration pool shape drawing
5 SizesPool Shape

The Inspiration

40′35′30′26′23′

Our most versatile model, offered in five sizes to fit nearly any yard. A true family pool.

View photos & specs
The Freedom with Splash Pad fiberglass pool by Imagine Pools
The Freedom with Splash Pad pool shape drawing
Splash PadPool Shape

The Freedom with Splash Pad

37′34′30′

Built around a large splash pad and tanning ledge, ideal for kids, loungers, and shallow-water lounging.

View photos & specs
The Celebration fiberglass pool by Imagine Pools
The Celebration pool shape drawing
8 ft DeepPool Shape

The Celebration

40′

A grand 40-foot design with a deep end up to 8 feet, plenty of room for diving and play.

View photos & specs
The Illusion fiberglass pool by Imagine Pools
The Illusion pool shape drawing
Pool Shape

The Illusion

40′35′30′

A bold, modern rectangle with a generous swim area and clean, straight lines.

View photos & specs
The Bliss fiberglass pool by Imagine Pools
The Bliss pool shape drawing
Pool Shape

The Bliss

35′30′26′

Crisp contemporary lines with wide entry steps that make getting in and out easy.

View photos & specs
The Fantasy fiberglass pool by Imagine Pools
The Fantasy pool shape drawing
Pool Shape

The Fantasy

35′30′26′

A graceful design with softened corners and a roomy, easy-to-enjoy interior.

View photos & specs
The Exquisite fiberglass pool by Imagine Pools
The Exquisite pool shape drawing
Pool Shape

The Exquisite

40′35′30′

A refined, contemporary shape with elegant proportions and a wide swim area.

View photos & specs
The Brilliant fiberglass pool by Imagine Pools
The Brilliant pool shape drawing
Pool Shape

The Brilliant

40′35′30′

A timeless rectangular shape that suits both modern and traditional backyards.

View photos & specs
The Marvelous fiberglass pool by Imagine Pools
The Marvelous pool shape drawing
Pool Shape

The Marvelous

40′35′30′

A spacious design offered up to 40 feet, with plenty of room to swim and entertain.

View photos & specs
The Freedom fiberglass pool by Imagine Pools
The Freedom pool shape drawing
Pool Shape

The Freedom

30′26′23′

A clean, flexible design with an integrated ledge that fits smaller and mid-size yards.

View photos & specs
The Vision fiberglass pool by Imagine Pools
The Vision pool shape drawing
CompactPool Shape

The Vision

26′23′20′16′

Our most compact lineup, from a 16-foot plunge to a 26-foot pool. Perfect for tight yards and courtyards.

View photos & specs

Not sure which model fits your yard? Tell us about your space and we will help you choose.

Spas

Standalone Spas

Drop a spa in on its own or pair one beside your pool. All fiberglass, all jet-ready. Tap any spa for photos and specs.

The Dream Spa fiberglass spa by Imagine Pools7′5″

The Dream Spa

A square standalone spa with comfortable seating, ready for jets and a full hydrotherapy setup.

View photos & specs
The Treasure Spa fiberglass spa by Imagine Pools7′8″

The Treasure Spa

A roomy round spa that lets you place jets right where you want them, feet, legs, or back.

View photos & specs
The Mystique Spa fiberglass spa by Imagine Pools6′10″

The Mystique Spa

An open-seating square spa, good for a quiet soak or an evening with friends.

View photos & specs
Features

Tanning Ledges & Features

Add-on ledges for cool, shallow lounging, a sun deck for chairs and umbrellas, and a safe shallow zone for kids and pets. Tap any ledge for photos and specs.

The Pearl Tanning Ledge by Imagine Pools10′4″

The Pearl Tanning Ledge

A curved tanning ledge for cool, shallow lounging and a safe spot for kids to play.

View photos & specs
The Mercury Tanning Ledge by Imagine Pools10′5″

The Mercury Tanning Ledge

A popular rectangular ledge that pairs with most pools and keeps kids and pets cool.

View photos & specs
The Lagoon Tanning Ledge by Imagine Pools14′

The Lagoon Tanning Ledge

A 14-foot sun deck with room for lounge chairs, umbrellas, and bubblers.

View photos & specs
Gelcoat Colors

Pick Your Water Color

The gelcoat finish sets the mood of your whole backyard. Here are the colors available on Imagine Pools.

Ocean Blue gelcoat pool colorMost Popular

Ocean Blue

Our most popular color. Refreshing, cool, and full of sparkle.

Reef Blue gelcoat pool color

Reef Blue

A softer tone for a calm, smooth water look.

Seaside Sky gelcoat pool color

Seaside Sky

An energetic, glistening surface that catches the light.

Coral Blue gelcoat pool color

Coral Blue

Caribbean-inspired, for a vivid, exotic blue.

Storm Grey gelcoat pool color

Storm Grey

A classic, easygoing swimming experience.

Ice Silver gelcoat pool color

Ice Silver

Silver with blue speckles that throw dramatic rays of color.

Beach Sand gelcoat pool color

Beach Sand

Nearly transparent and clean, showing off the pool itself.

Volcanic Black gelcoat pool color

Volcanic Black

A contemporary showcase color with extreme shine as light hits the surface.

Colors render differently in person and in different light. Ask us for physical samples before you decide.

Local Install, Done Right

What Installing a Fiberglass Pool in Knoxville Actually Takes

The shell is built in a factory, but the install is entirely local, and East Tennessee ground has a say. Much of Knoxville sits on clay soil that holds water, so proper backfill and engineered drainage around the shell are what keep it level and stable for decades. Plenty of local lots are sloped, which can mean a retaining wall or a regraded pad before the pool is ever set. And on tight, established-neighborhood lots, getting a crane close enough to fly a shell into place takes planning a national template page never accounts for.

That is the difference between a pool that is dropped in and one that is installed right. We have crane-set Imagine Pools shells across Knox County and the surrounding lake communities, handling the clay, the slope, the crane access, and the permits as one accountable crew. Most fiberglass builds land in the $70,000 - $190,000+ range installed, and we walk you through exactly what your specific site adds before any dirt moves.

Financing available through HFS Financial

Flexible monthly payments, fast online approval, no home equity required. Options for every budget.

Ready for a Fiberglass Pool?

Get a free on-site consultation for your backyard. No obligation.

What are you interested in? (select all that apply)

Best way to reach you?

“Chris Morales transformed our pool area into a work of art. The workmanship is exemplary. Highly recommend without reservation.”

Gary Stephens, Knoxville

4.9 ★ (41 reviews) Licensed & insured A real person, not a call center

We personally reply within 48 hours.

Free on-site consult. No pressure, no sales gimmicks. If it's not a fit, we'll tell you straight.

By submitting, you agree to be contacted about your project. We never share your information.

What It Costs

Honest Price Ranges

Most contractors dodge this question. We will not. These are real East Tennessee ranges to help you set a budget, not a quote. Every project is unique, so your exact number comes from a free on-site consultation.

Classic

$70K to $95K

Family pool, the essentials done right

Entertainer

$100K to $135K

Bigger shell, tanning ledge, automation

Resort

$135K to $190K+

Largest shell + standalone spa + premium

A + means and up: larger or feature-rich builds have no set ceiling.

Pool pricing covers the pool itself; decking, patios, and retaining walls are their own projects, priced separately.

We give discounts when projects combine multiple features, and site conditions like rock, slope, and access can move the number. We spell it all out clearly up front.

Fiberglass Questions

Frequently Asked

How much does a fiberglass pool cost installed in East Tennessee?+

Most fiberglass pools we install run $70,000 to $190,000 or more. The biggest things that move that number are the shell size and model, the gelcoat color, and add-ons like a tanning ledge, heater, saltwater system, or an attached spa. We will get you a real number for your yard at the free consult, not just a range.

How long does a fiberglass pool installation actually take?+

About 3 to 4 weeks from the day we break ground to your first swim. That is possible because the shell is manufactured off-site and crane-set into your excavated hole in a single day, so we are not forming and curing concrete on your property for months. Permitting and design happen before that clock starts, so total calendar time also depends on how fast those approvals come back.

How long does a fiberglass pool actually last?+

A quality fiberglass shell lasts 20 to 35 years. The gelcoat surface is what ages first, similar to a boat hull, and how it holds up depends a lot on water chemistry and sun exposure over the years.

What actually goes wrong with fiberglass pools, honestly?+

The two real issues are gelcoat fading or dulling over time from sun and water chemistry, and, on a poorly done install, walls that bulge or a shell that shifts because the backfill and drainage were not handled correctly. Fiberglass also comes in a fixed set of shapes and sizes since the shell is pre-manufactured, so if you want a fully custom shape, a gunite pool is the better fit. We tell people this upfront because a good fiberglass pool and a bad one look identical on install day, the difference shows up in year five.

How does a fiberglass pool handle freezing winters?+

Fine, when it is winterized correctly. The real freeze risk is water left sitting in the plumbing lines, which can crack pipes and equipment, so proper closing means clearing those lines, lowering the water to the right level without fully draining the pool, and covering it. The shell itself is not the vulnerable part, the plumbing and equipment are.

Can I run a saltwater system with a fiberglass pool?+

Yes, and it is a great pairing. The gelcoat surface is unaffected by salt, unlike some plaster and tile finishes that can wear faster under a saltwater system. A saltwater system makes its own chlorine from dissolved salt, so the water feels softer and you handle fewer chemicals day to day.

What warranty comes with a fiberglass pool?+

There are two separate warranties, and it matters to understand both. As an authorized Imagine Pools dealer, the shell itself carries the manufacturer structural warranty, and separately we stand behind our own installation workmanship. Equipment like pumps, heaters, and lights carry their own manufacturer warranties on top of that. We spell out exactly what is covered, and for how long, in writing before you sign.

Can I finance a fiberglass pool?+

Yes. We partner with HFS Financial for home-improvement financing, and you can get pre-qualified in minutes with a soft credit check that does not affect your score, with no home equity required. That means financing is on the table even if you are in a newer home or have not built up much equity yet.

Get a Free Quote